{"product_id":"5-stage-reverse-osmosis","title":"5 Stage Reverse Osmosis RO and Di Unit","description":"\u003cp\u003eOur RO\/Di units include a DI chamber fitted as the final stage of filtration\u003c\/p\u003e\n\u003cp\u003e( which is supplied filled with high quality tulsion MB115 Resin)\u003c\/p\u003e\n\u003cp\u003eAfter passing through the Pre filters (stage 1 -2 and 3) and the r\/o membrane, the r\/o filtered water is then passed through the DI filter, to reduce the TDS reading to 0.\u003c\/p\u003e\n\u003ch3\u003eThe 5 Stages of Filtration Are:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e5 - Micron Sediment Filter Made of 100% Pure Polypropylene Fibres. Removes Dirt, Sand and Rust.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA gac granular activated carbon filter Removes chlorine and organic compounds.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA Carbon Block Filter Composed of High Performance Carbon. Removes Trihalomethanes, Pesticides, Volatile Organic Chemicals and 99.95% of Giardia and Cryptosporidium Cysts.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh Rejection Thin Film Composite Reverse Osmosis Membranes The Membranes Remove Contaminants Present in your Water Including, up to 99% of Dissolved Salts, Lead, Copper, Barium, Bacterial By-Products, Oestrogen and Silica.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDI Cartridge filled with tulsion MB115 mixed bed resin for total De-ionisation (polishing the water) of your reverse osmosis water.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eEnabling you to achieve a total dissolved solids (TDS) of 0ppm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese Superb Systems Come with Installation Instructions, and all Pipes, Pre Filters, Post Filters, and Fittings Required for easy Installation\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePlease note:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eThe input water must meet the following criteria for the unit to operate w\u003c\/span\u003e\u003cspan\u003eater temp must be less than 45 degrees Celsius.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eiron content max 0.1ppm\u003c\/li\u003e\n\u003cli\u003eMin mains water pressure 40psi (80psi min for optimum production amounts)\u003c\/li\u003e\n\u003cli\u003ePh 3 to 11\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMains water tds reading below 1000ppm\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e\n\u003ch2\u003eReverse Osmosis (R\/O) System – Installation \u0026amp; Operating Instructions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This Reverse Osmosis (R\/O) system must be installed by a competent person. Installation must comply with all local water regulations and the requirements of your regional water authority.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Reverse Osmosis Unit\u003c\/li\u003e\n\u003cli\u003e1 x Hosepipe Connector\u003c\/li\u003e\n\u003cli\u003e6 Metres Plastic Tubing\u003c\/li\u003e\n\u003cli\u003e1 x R\/O Housing Spanner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePre-Filter Installation \u0026amp; Maintenance\u003c\/h3\u003e\n\u003cp\u003eTo ensure a watertight seal and prevent friction damage, apply a light coating of petroleum jelly (Vaseline) to all rubber O-rings before installation.\u003c\/p\u003e\n\u003ch4\u003eFilter Replacement Order (Right to Left)\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight:\u003c\/strong\u003e 5 Micron Sediment Filter (White Housing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre:\u003c\/strong\u003e GAC Carbon Filter (White Housing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeft:\u003c\/strong\u003e CTO Carbon Block Filter (White Housing)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAlways ensure housings are tightened securely using the supplied spanner, without overtightening.\u003c\/p\u003e\n\u003ch3\u003eInstalling the R\/O Membrane\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not remove the membrane from its protective packaging until ready to install.\u003c\/li\u003e\n\u003cli\u003eRemove the membrane housing cap.\u003c\/li\u003e\n\u003cli\u003eInsert the membrane by pushing the spigot end (with two O-rings) firmly into the socket at the far end of the housing.\u003c\/li\u003e\n\u003cli\u003eEnsure the membrane is fully seated.\u003c\/li\u003e\n\u003cli\u003eLubricate the housing O-ring lightly with petroleum jelly.\u003c\/li\u003e\n\u003cli\u003eRefit and securely tighten the membrane housing cap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePoly Tubing Installation (Push-Fit Connections)\u003c\/h3\u003e\n\u003cp\u003eAll connections use push-fit fittings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the blue locking clip.\u003c\/li\u003e\n\u003cli\u003eInsert the poly tube firmly into the fitting.\u003c\/li\u003e\n\u003cli\u003eRefit the blue locking clip to secure the connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThree Required Connections\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Supply Inlet:\u003c\/strong\u003e Connect to the R\/O unit inlet on the right-hand side (Red Sticker).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurified Water Outlet:\u003c\/strong\u003e Connect to the outlet located on the top right-hand side of the DI cartridge (Blue Sticker).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaste Outlet:\u003c\/strong\u003e Connect to the flow restrictor on the left-hand rear of the system (Black Sticker).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe blue tap located on the top left-hand side is the \u003cstrong\u003emanual flush valve\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore first use:\u003c\/strong\u003e Open the flush tap for approximately 30 seconds, then close. This will flush any contaminants from the membrane.\u003c\/p\u003e\n\u003ch3\u003eStart-Up Procedure\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure all connections are secure.\u003c\/li\u003e\n\u003cli\u003eTurn on the water supply.\u003c\/li\u003e\n\u003cli\u003eInspect all fittings and housings for leaks.\u003c\/li\u003e\n\u003cli\u003eWithin a few minutes, purified R\/O water will begin to flow slowly.\u003c\/li\u003e\n\u003cli\u003eAllow the system to run for approximately 5 minutes during first use to flush the carbon filters.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eYour Reverse Osmosis system is now ready for operation.\u003c\/p\u003e","brand":"Hytec Horticulture","offers":[{"title":"Default Title","offer_id":48536568430924,"sku":"5-Stage-RO-Di-Unit","price":159.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/3044\/4620\/files\/5-Stage-Reverse-Osmosis-RO-and-Di-Unit-main_c6cdad5e-e27b-4fd2-a6d9-c744cf5c6094.jpg?v=1723126291","url":"https:\/\/hytachydroponics.com\/products\/5-stage-reverse-osmosis","provider":"Hytec Horticulture","version":"1.0","type":"link"}